Rund Silikon Metrische Gewinde

Flanged Caps are designed for easy assembly and removal, either with automated equipment or by hand. Typically used to protect metric or imperial threads, with or without O-Rings. The larger flange allows for faster application and removal when using it by hand.

For the purpose of quality control; the natural coloured caps allow you to see through the cap and check whether the O-ring is installed, or not installed, on the protected fitting.

• It is used to protect BSP and UNF threads.

• Designed with a small flange.

• It increases protection against contaminants and limits wasted time during repetitive operations.

Material: LDPE, PE Farbe: Natur, Rot Seriennummer: SR1024, SR1124, SR1025, SR1380

Socket Screw Cover Caps protect socket head screws, preventing damage caused by corrosion and the ingress of impurities. They also add aesthetical appeal. Can tolerate temperatures ranging from -40C up to +150C. Used for automotive and electrical purposes.

• Used for the inside of UPS boxes when high voltage cables pass close to metal screw heads.

• Cover and protect socket head screws from dust and dirt, while providing a quick and clean finish.

• Used in appliances, electrical applications and automotive.

Material: Silikon, LDPE Farbe: Schwarz, Weiß, Grau Seriennummer: SR1628, SR1813

High-temperature Tapered Plugs protect and mask components during painting, sandblasting, abrasive chemical processing, and during exposure to high temperatures (of up to +218ºC for EPDM parts and 316C for silicone parts). The tapered form allows the plug to expand and adapt to the contour of the hole, as it heats.

• Available as a solid plug or with a hollow core to aid in the compression to fit threaded or unthreaded holes.

• These reusable plugs come in a premium high temp silicone material or an economical reduced temp EPDM material.

• Used in chemical, machining applications and industrial equipment.

Material: EPDM, Silikon, TPG Farbe: Schwarz, Natur, Gelb, Blau, Grün, Lila, Orange, Pink, Rot Seriennummer: SR1089, SR1045, SR1179, SR1176, SR1499, SR1498, SRF0072

Masking Washer Caps are intended as caps with an additional washer to hide grounding or plug holes, when inverted. Protects against solvents, abrasives, and suitable for temperatures of up to +250ºC.

• Masking Washer Caps that can be applied as a protective cap for threaded and non-threaded end tip.

• Integrated washer masks of grounding and also provides edge protection.

• Can also be inverted and used to plug holes.

Material: Silikon Farbe: Grau, Natur, Lila, Gelb, Schwarz, Rot, Pink, Grün Seriennummer: SR5756

Easy Pull Masking Caps are intended for masking parts during anodising, blasting, powder coating, e-coating, plating, and ordinary paint applications. Available in a variety of materials with a wide range of benefits. Silicone is a high-quality masking substance that can withstand high temperatures. EPDM is a less expensive compound that is less heat resistant.

Die Maskierungskappen für einfaches Abziehen bieten optimalen Schutz für Enden von Profilen wie Stangen, Rohre und Schläuche während des Herstellungsverfahrens.

• Typische Anwendungen sind: Eloxieren, Strahlen, Pulverbeschichten, E-Beschichten, Galvanisieren und allgemeine Lackierstraßen.

• Um eine optimale Passform zu gewährleisten, sollte der Innendurchmesser etwa 10 % kleiner sein als der Außendurchmesser des abzudeckenden Teils.

Material: EPDM, Silikon, PVC Farbe: Schwarz, Natur, Transparent, Gelb Seriennummer: SR1096, SR6119, SR5755, SRF0079

High temperature Washer Plugs are designed to mask the surface around a threaded or plain hole, with an integrated washer and plug that function as a single item. Easy to install and remove; they ensure a snug fit and secure seal to prevent leakage or contamination. Capable of withstanding temperatures of up to 250C.

• It has an integrated washer and plug that allows them to function as a single item.

• Can withstand high temperatures of up to 250 degrees Celsius.

• Used for powder coating, painting, plating, sealing, automotive assembly, and electronics manufacturing.

Material: Silikon, EPDM Farbe: Natur, Schwarz, Weiß, Grau, Dunkelgrün, Gelb, Pink, Lila, Rot Seriennummer: SR1065, SR1092, SR5753

Masking pull plugs are used to mask threaded and non-threaded holes, offering resistance to chemicals. The pull tab makes them easy to install and remove, ensuring a secure fit that prevents leaks or seepage. The reusable material allows for multiple uses, reducing the need for frequent replacements and helping minimize waste. Cn withstand temperatures of up to 250C.

• Used to mask threaded and non-threaded holes.

• The pull tab simplifies installation and removal, allowing for smooth insertion and a secure fit.

• Used in powder coating, sealing, automotive assembly, and electronics production.

Material: EPDM, Silikon, Silikonkautschuk Farbe: Schwarz, Transparent, Natur, Rot, Grau, Weiß, Lila, Grün, Pink, Orange, Gelb, Blau Seriennummer: SR1094, SR1057, SR6118, SR6117, SRF0060, SR5750, SR5749, SR5752, SR1028

Masking Weld Nuts are designed to cover and protect threaded and unthreaded weld nuts. It has a pull-tab and teeth that hold the thread. Can endure temperatures as high as +250C.

Schweißmuttern haben ein Gewinde, und es ist wichtig, dass dieses Gewinde nicht pulverbeschichtet oder oberflächenbehandelt wird. Unser Sortiment an Maskierungszugstopfen wurde speziell zum Maskieren von Durchgangsbohrungen mit und ohne Gewinde entwickelt und eignet sich ideal zum Maskieren von Schweißmuttern.

• Die Zuglasche ermöglicht ein schnelles und einfaches Entfernen.

• Der Lamellen des Stopfens bieten Griffigkeit am Gewinde und sorgen somit für einen guten Sitz, der die Maskierungsbaugruppe sicher hält.

Material: Silikon Farbe: Rot, Blau, Gelb, Schwarz Seriennummer: SRF0061