Bei größeren Mengen und kundenspezifischen Produkten legen Sie diese bitte in Ihren Einkaufswagen und klicken Sie dann auf Angebotsanfrage oder senden Sie einenachrichtwir antworten Ihnen innerhalb von 2 Werktagen.
(32 Produktgruppen)
Unsere vibrationsdämpfenden Abstandhalter und Distanzstücke fungieren als Puffer und absorbieren Schwingungen. Sie sind geeignet für Anwendungen, bei denen Bewegungen in stationären Maschinen nicht verhindert werden können. Diese Produkte wurden so gestaltet, dass sie auch die Geräuschdämpfung unterstützen. Hergestellt aus schwarzem Neopren-Kautschuk, 60 Shore, Oberfläche aus transparenter Dichromatbeschichtung. Kann Temperaturen von -40 bis 50 C standhalten.
Dies aus schwarzem Gummi hergestellten Aufklebescheiben sind selbstklebend und eignen sich für glatte und trockene Oberflächen. Sie sind rutschfest und hinterlassen beim Entfernen keine Abriebspuren.
Blanking Plugs protect sheet metal from sharp edges and seal panel cavities to prevent dust and moisture ingress. They provide a clean finish, can resist acids and also dampen vibrations. Available in various materials; TPE withstands temperatures up to 95C, TPR handles -40C to 135C, and PVC endures up to 50C.
Flanged Caps are designed for easy assembly and removal, either with automated equipment or by hand. Typically used to protect metric or imperial threads, with or without O-Rings. The larger flange allows for faster application and removal when using it by hand.
For the purpose of quality control; the natural coloured caps allow you to see through the cap and check whether the O-ring is installed, or not installed, on the protected fitting.
Expandable Masking Covers are an alternative to standard caps. Intended to protect against dirt and moisture. Can expand and shrink to accommodate the most unusual forms. Can resist temperatures of up to 100ºC.
Einsätze und Puffer mit Gewinde können als Nivellierfuß oder als Puffer für kleine Ausrüstungsgegenstände eingesetzt werden. Das nicht-korrosive Material von Bolzen und Fuß ist langlebig und auch in rauen Umgebungen beständig.
Seriennummer: SR5804
Masking Flangeless Plugs are designed to cover holes without masking the surrounding area, protecting against contaminants. Featuring conical rings and a hollow core, these plugs can mask multiple areas at once.
Masking Straight Tubing is meant to cover long studs and pins with short caps. Can be trimmed to the desired size and masked off with a through-hole by drawing the tubes outside diameter through. Supplied in rolls for enhanced convenience.
Buchsen aus Naturkautschuk und Stahl. Diese Buchsen sind in drei Typen und einer Auswahl an Größen erhältlich, passend für Ihre Zwecke.
Seriennummer: SR6485
Schwingungsdämpfende Maschinenfüße mit einem Gehäuse aus verzinktem Stahl ST37 und einem Formteil aus Naturkautschuk. Diese Vibrationsdämpfer haben eine Shorehärte von 60 und es werden bruchsichere Varianten im Sortiment angeboten. Diese Dämpfer sind in verschiedenen Typen und Gewindegrößen erhältlich.
Socket Screw Cover Caps protect socket head screws, preventing damage caused by corrosion and the ingress of impurities. They also add aesthetical appeal. Can tolerate temperatures ranging from -40C up to +150C. Used for automotive and electrical purposes.
Masking Straight Caps are excellent for protecting and masking pieces through various masking techniques. Designed to protect studs, pins, tube ends, and other applications that need threaded or non-threaded holes. Available in Silicone and EPDM.
High-temperature Tapered Plugs protect and mask components during painting, sandblasting, abrasive chemical processing, and during exposure to high temperatures (of up to +218ºC for EPDM parts and 316C for silicone parts). The tapered form allows the plug to expand and adapt to the contour of the hole, as it heats.
Covered Tapered Plugs have convex edges that guarantee a secure fit. Features a push-fit design that makes it simple to use and remove. Used for pipes, blind holes and furniture.
Masking Washer Caps are intended as caps with an additional washer to hide grounding or plug holes, when inverted. Protects against solvents, abrasives, and suitable for temperatures of up to +250ºC.
Easy Pull Masking Caps are intended for masking parts during anodising, blasting, powder coating, e-coating, plating, and ordinary paint applications. Available in a variety of materials with a wide range of benefits. Silicone is a high-quality masking substance that can withstand high temperatures. EPDM is a less expensive compound that is less heat resistant.
Die Maskierungskappen für einfaches Abziehen bieten optimalen Schutz für Enden von Profilen wie Stangen, Rohre und Schläuche während des Herstellungsverfahrens.
Masking Star Tubes have a star-shaped form that is suitable for lengthy studs and pins. The flexibility makes it easy to insert and remove. Fits over threaded studs, non-threaded tubes and other irregular forms.
High temperature Washer Plugs are designed to mask the surface around a threaded or plain hole, with an integrated washer and plug that function as a single item. Easy to install and remove; they ensure a snug fit and secure seal to prevent leakage or contamination. Capable of withstanding temperatures of up to 250C.
Masking pull plugs are used to mask threaded and non-threaded holes, offering resistance to chemicals. The pull tab makes them easy to install and remove, ensuring a secure fit that prevents leaks or seepage. The reusable material allows for multiple uses, reducing the need for frequent replacements and helping minimize waste. Cn withstand temperatures of up to 250C.
Masking Weld Nuts are designed to cover and protect threaded and unthreaded weld nuts. It has a pull-tab and teeth that hold the thread. Can endure temperatures as high as +250C.
Schweißmuttern haben ein Gewinde, und es ist wichtig, dass dieses Gewinde nicht pulverbeschichtet oder oberflächenbehandelt wird. Unser Sortiment an Maskierungszugstopfen wurde speziell zum Maskieren von Durchgangsbohrungen mit und ohne Gewinde entwickelt und eignet sich ideal zum Maskieren von Schweißmuttern.
Schnelleinbautüllen haben eine abgeschrägte Kante, die eine schnellere Installation ermöglicht, da nur von einer Seite Druck ausgeübt werden muss, um sie in einer Platte zu befestigen. Ideal, wenn der Zugang zur anderen Seite der Platte eingeschränkt ist.
Puffer zum Einschieben können als Gleiter, Puffer, Abschlusselemente, Schieber und Stopper in zahlreichen Anwendungen verwendet werden. Der Einpressschaft hält den Puffer sicher an seinem Platz und schützt damit Oberflächen vor Kontakt.
Seriennummer: SR5807
Puffer zum Einschieben können als Gleiter, Puffer, Abschlusselemente, Schieber und Stopper in zahlreichen Anwendungen verwendet werden. Der Einpressschaft hält den Puffer sicher an seinem Platz und schützt damit Oberflächen vor Kontakt.
Seriennummer: SR5795
Pufferfüße zum Anschrauben verfügen über eine Aussparung zur Nutzung als Füße an kleinen Geräten und anderen Einzelhandelsprodukten. Diese Füße werden mit einer separaten Schraube, einem Bolzen oder einer Niete an der Baugruppe befestigt und sind zum Schutz der Oberflächen aus kratzfestem Material gefertigt.
Seriennummer: SR1590 ,SR5794, SRP0007, SRP0037
Pufferfüße zum Anschrauben mit einem Gewindebolzen können als Nivellierfuß oder als Puffer für kleine Ausrüstungsgegenstände eingesetzt werden. Das nicht-korrosive Material von Bolzen und Fuß ist langlebig und auch in rauen Umgebungen beständig..
Seriennummer: SR5726
Leider ist Ihre Sitzung aufgrund von Inaktivität abgelaufen. Bitte melden Sie sich an oder laden Sie die Seite erneut, um fortzufahren.
You are logged out due to a second login attempt. Please login again if you want to continue in this device.
You are logged out due to a second login attempt. Please login again if you want to continue in this device.