Clevis Joints & Pins M20

These Clevis Joints with Pin are a coupling in which the mating parts fit between the forks and are secured in position by clevis pins. They serve as a U-shaped connection between two rods or shafts to facilitate tractive or linear thrust movements.

The clevis pin is held with a cotter pin and a washer to prevent it from falling loose. This ensures the joint's stability and integrity, even under heavy loads and stresses. If necessary, the joint can be disassembled for maintenance by withdrawing the cotter pin. This enables component inspection, lubrication, or replacement, assuring the joint's continuous performance and durability.

They are easy to install and adjust using standard thread. They are most typically employed as a coupling on the end of air cylinders or at each end of a turnbuckle or wire rope for tensioning. Still, they can also be found in various other sectors and applications such as automotive, construction, and manufacturing.

• U-shaped connection between two rods or shafts to facilitate tractive or linear thrust movements.

• Held with a cotter pin and a washer to prevent it from falling loose

• It is employed as a coupling on the end of air cylinders or at each end of a turnbuckle or wire rope for tensioning.

Material: 303 Stainless Steel, Steel Series Code:

These Steel Clevis Joints with Retention Clips are a type of coupling in which the matching parts fit between the forks and are held in place by retention clips. They form a U-shaped connection between two rods or shafts to allow for tractive or linear thrust movements.

The retention clip is a clip that locks in place around the base of the clevis preventing accidental disconnection, resulting in a clean, compact assembly. The steel substance ensures its longevity and ability to endure high forces, as well as resistance to wear and corrosion. If necessary, the joint can be dismantled for maintenance by removing the retention clip. This allows for component examination, lubrication, or replacement.

They are easy to install and adjust using standard thread. They are most typically employed as a coupling on the end of air cylinders or at each end of a turnbuckle or wire rope for tensioning, as well as in industries such as construction, automotive and manufacturing.

• U-shaped connection between two rods or shafts to allow for tractive or linear thrust movements.

• Steel material ensures its longevity and ability to endure high forces, as well as resistance to wear and corrosion.

• Joint can be dismantled for maintenance by removing the retention clip, allowing for component examination, lubrication, or replacement.

Material: Steel Series Code:

These Clevis Joint Mating Pieces are meant to work with the clevis joint, allowing for smooth and controlled movement. These are intended to fit between our clevis joints to provide a connection where an angular offset is required.

The excellent fit of the mating piece provides for a tight and solid connection with the clevis joint, assuring stability, reliability, and optimal load transmission. The smooth surface finish of the mating piece decreases friction and wear between the mating components, contributing to the overall longevity and efficiency of the joint.

It ensures they remain aligned and engaged under varying loads and conditions by providing a reliable and safe connection. The thread size is designed to match the clevis joint, making installation and removal simple. Used in various applications for steering linkages, suspension systems, and control mechanisms in the automotive industry, manufacturing, and construction.

• Intended to fit between our clevis joints to provide a connection where an angular offset is required.

• The thread size is designed to match the clevis joint, making installation and removal simple.

• The smooth surface finish of the mating piece decreases friction and wear, contributing to the longevity and efficiency of the joint.

Material: Stainless Steel, Steel Series Code: