Stainless Steel Clevis Joints & Pins

Stainless Steel Assembly pins made for use with Clevis Fasteners.

These Clevis Joints with Pin are a coupling in which the mating parts fit between the forks and are secured in position by clevis pins. They serve as a U-shaped connection between two rods or shafts to facilitate tractive or linear thrust movements.

The clevis pin is held with a cotter pin and a washer to prevent it from falling loose. This ensures the joint's stability and integrity, even under heavy loads and stresses. If necessary, the joint can be disassembled for maintenance by withdrawing the cotter pin. This enables component inspection, lubrication, or replacement, assuring the joint's continuous performance and durability.

They are easy to install and adjust using standard thread. They are most typically employed as a coupling on the end of air cylinders or at each end of a turnbuckle or wire rope for tensioning. Still, they can also be found in various other sectors and applications such as automotive, construction, and manufacturing.

• U-shaped connection between two rods or shafts to facilitate tractive or linear thrust movements.

• Held with a cotter pin and a washer to prevent it from falling loose

• It is employed as a coupling on the end of air cylinders or at each end of a turnbuckle or wire rope for tensioning.

Material: 303 Stainless Steel, Steel Series Code: SRR3407, SRR3406, SRR3405, SRR3390, SRR3404, SRR3389

These Clevis Pins are cylindrical pins with a flat head on one end. It is intended to fit into the holes of a clevis joint, forming a pivotal connection that allows for angular movement and adjustment.

It has exceptional strength, durability, and corrosion resistance. Its cylindrical design enables simple insertion into the holes and rotation of the mating component. At the same time, the flat head provides a stop during installation.

Its design allows for quick and easy disassembly, modification, or replacement of the pin as needed. Used in the automobile industry, manufacturing, and construction for steering linkages, suspension systems, and control mechanisms.

• It forms a pivotal connection that allows for angular movement and adjustment.

• It has exceptional strength, durability, and corrosion resistance.

• Its cylindrical design enables simple insertion into the holes and rotation of the mating component.

Material: 303 Stainless Steel, Igumid G, Steel Series Code: SRR3454, SRR3453, SRR3450

These Clevis Joint Mating Pieces are meant to work with the clevis joint, allowing for smooth and controlled movement. These are intended to fit between our clevis joints to provide a connection where an angular offset is required.

The excellent fit of the mating piece provides for a tight and solid connection with the clevis joint, assuring stability, reliability, and optimal load transmission. The smooth surface finish of the mating piece decreases friction and wear between the mating components, contributing to the overall longevity and efficiency of the joint.

It ensures they remain aligned and engaged under varying loads and conditions by providing a reliable and safe connection. The thread size is designed to match the clevis joint, making installation and removal simple. Used in various applications for steering linkages, suspension systems, and control mechanisms in the automotive industry, manufacturing, and construction.

• Intended to fit between our clevis joints to provide a connection where an angular offset is required.

• The thread size is designed to match the clevis joint, making installation and removal simple.

• The smooth surface finish of the mating piece decreases friction and wear, contributing to the longevity and efficiency of the joint.

Material: Stainless Steel, Steel Series Code: SRR3427, SRR3426, SRR3421, SRR3420

These C-shaped Stainless Circlips are used to attach and securely grab bearings, gears, and other components to shafts or in bores.

It has good corrosion resistance, durability, and strength, making it suited for use in severe settings or when moisture or chemicals are present.

It is simple to install and remove, making assembly and maintenance easier and more efficient. It is commonly used in automotive, industrial, and manufacturing industries.

• It attaches and grabs bearings, gears and other components to shafts or in bores.

• Suited for use in severe settings or when moisture or chemicals are present.

• Used in automotive, industrial, and manufacturing industries.

Material: 303 Stainless Steel Series Code: SRR3447