Double Sided Mounting Non Threaded

This PCB Support range holds the board by it's edge, minimising the spaced required,. They are available with or without a locking nose to provide extra holding strength.

Banjo Union Caps prevent against dirt, damage and contamination, while in storage and transit. Quick and easy to install. Can endure temperatures ranging from -30C up to +80C.

• A range of protective caps designed for Banjo Union connections. They provide external assembly cover during storage and transportation to protect the connection from the ingress of dirt.

• Flexible PVC option offers snug fitting, and fast fitting and removal. HDPE options offers secure fit with a simple click.

• Fits hydraulic Banjo Unions to DIN 7642 B/E.

Material: HDPE, PVC Colour: Yellow, Red Series Code: SR1071, SRF0005

Bolt Protection Caps conceal and protect bolt heads and nuts against weathering. Ideal for bolt heads, screw heads and nuts. They create an enhanced finished appearance and are a great choice for outdoor applications.

This range is supplied in a wide choice of sizes to suit multiple applications.These caps are available to fit over common Imperial UNF, Metric ISO 4017 or DIN 933 standard bolts.

Available in a variety of colours.

• Protects joint fasteners against tampering and weathering.

• Creates an enhanced finished appearance for your application.

• Great choice for outdoor applications.

Material: LDPE Colour: Black, White, Grey, Green, Brown Series Code: SRF0130, SR1802, SRF0074

The Centre Pull Plug easily plugs into a threaded or non-threaded hole. Due to the tapered design, is can be used to plug multiple inner diameters. These plug offers a snug and secure fit that prevents undesired substances from entering the open tube or hole, protecting internal components and ensuring optimal performance.

The integrated centre tab is designed for quick and easy remova, by pulling the tab upwards. The plug protects against damage, dirt, moisture, and corrosion during storage and shipping.

Used in various applications.

• Tapered design means plug is suitable for multiple inner diameters.

• The integrated centre tab is designed for quick and easy removal and installation by hand and with a tool.

• Used in various applications, including electrical cables in machinery, equipment, and control panels.

Material: LDPE Colour: Yellow, Orange, Red Series Code: SR1174, SR1068

Cover Caps are used to conceal and protect exposed screw or bolt heads, while providing an attractive finish. Caps and washers are supplied separately.

• Designed to protect screw heads and are ideal for decorative purposes.

• Snap into place, protects against dirt and moisture.

• Used in applications such as medical, and industrial.

Material: HDPE, Brass, PA66, PA, LDPE Colour: Yellow, Silver, Natural, Black, Grey, Beige, White, Brown, Green, Blue, Violet, Red, Pink Series Code: SR1811, SR1889

Covered Tapered Plugs have convex edges that guarantee a secure fit. Features a push-fit design that makes it simple to use and remove. Used for pipes, blind holes and furniture.

• Designed to ensure a secure fit due to their convex sides.

• It protects against contaminants, debris, and damage.

• Reusable due to the material and without affecting the effectiveness of the sealing.

Material: Silicone Colour: Grey, Yellow, Green, White, Red, Black, Pink, Purple, Blue, Clear Series Code: SR5751

Cross Head Screw Caps are designed to conceal and protect exposed Crosshead (Phillips) head screws from dust and dirt. They offer a neat and tidy finish and can be easily installed by simply pressing them over the screw head until they click into place.

It helps prevent rusting, corrosion, and other forms of damage. Used on electrical enclosures, switchgear, and applications in industrial.

• Material: LDPE
• Colour: Black, White, Brown and Teak

This range of PCB supports has a cupped bottom fixture that adds extra stability and covers the fixture. They are available in two locking style tops, bayonet or teardrop.

Decorative Screw Covers are designed to cover exposed screw heads. Provides a clean appearance, with decorative appeal. The adhesive backing makes installation simple; they snap securely over the screw head. Available in different colours. Used in applications, including furniture and automobile design.

• Designed to conceal exposed screw heads and provide a more decorative and polished look.

• It has a wide range of up to 16 colours.

• Used in applications like furniture, cabinets, office decor and even automotive decor.

Material: ABS Colour: Wenge, Dark Oak, Pine, Walnut, Mahogany, Ash, Beech, Cherry, Grey, Black, Cream, Ivory, Aluminium, Light Oak, Grid, White Series Code: SR1600

Driveshaft Protection Caps protect the ends of exposed driveshafts from oil and chemicals, during transportation and storage. They are resistant to ripping and splitting.

• Driveshaft Protection Caps are used for the protection and masking of driveshaft, and the surrounding bearings, from oil and an array of chemicals.

• Fits DIN 748, IEC 600-72 and ISO R775

Material: LDPE, PVC Colour: Yellow Series Code: SR1079

Our dual locking circuit board support posts lock at both ends and offer a quick and easy way to secure two PCBs or a single PCB to framework or a chassis. They are available with alternative locking options at either end of the spacer and come in different body types, as well as numerous sizes to suit your project requirements. They are suitable for a range of needs and applications. The range is available in either Nylon 6/6 (RMS-01) or flame retardant Nylon 6/6 (RMS-19) with two UL certification options (UL94 V0 and UL94 V2).

• Easily mounted by hand.
  
• Natural colour.

Series Code :SR2719

Easy Pull Masking Caps are intended for masking parts during anodising, blasting, powder coating, e-coating, plating, and ordinary paint applications. Available in a variety of materials with a wide range of benefits. Silicone is a high-quality masking substance that can withstand high temperatures. EPDM is a less expensive compound that is less heat resistant.

• Easy Pull Masking Caps provide optimum protection for end tip profiles, such as rods, pipes and tubes during manufacturing processes.

• Typical applications include; anodizing, blasting, powder coating, e-coating, plating and general paint lines.

• To ensure the best possible fit, the inside diameter dimension should be approximately 10 percent smaller than the outside diameter of the part being masked.

Material: EPDM, Silicone, PVC Colour: Black, Natural, Clear, Yellow Series Code: SR1096, SR6119, SR5755, SRF0079

Elastomer Lanyard is intended to link or separate two components. Features a fastening loop on one end and a mounting hole on the other. The loop helps lessen the danger of failure in heavy-duty applications, while also providing safe installation.

• Designed to connect and secure two separate components.

• Can accommodate a wide range of applications.

• Highly flexible EPDM material can stretch up to three times its nominal length.

Material: EPDM Colour: Black Series Code: SR2000

End Tips protect the exposed ends of rods and tubes, while providing a neat appearance. The simple push-fit design allows for quick and easy installation.

• End Tips are a versatile cap with a multitude of uses.

• Ideal for product presentation and protection.

• Durable and visually pleasing.

Material: PVC, TPE Colour: White, Black Series Code: SR1506, SR1500, SR1501

Expandable Masking Covers are an alternative to standard caps. Intended to protect against dirt and moisture. Can expand and shrink to accommodate the most unusual forms. Can resist temperatures of up to 100ºC.

• Best used for general protection during transport and storage.

• It withstands a temperature of 100 degrees celsius.

• Ideal alternative to a more conventional cap when the part to cover has an awkward shape.

Material: PE, LDPE, Silicone Colour: Clear, Blue, Red, White Series Code: , SR1097, SRF0019

Fence Post Caps are protective covers that fit over the tops of fence posts or pipes. Offers protection against weather damage and deterioration of applications. Used in the residential and commercial sectors.

• Designed to fit over the top of a fence post, pipes, and tubes.

• Helps protect from weather damage, dirt, or moisture.

• It is easy and quick to install or remove.

Material: PE Colour: White Series Code: SRF0011

Finned Stud Caps are used to protect a wide range of studs. The internal fins provide a stronghold and are flexible to be suitable for various diameters with the use of one part. The range comes with a grip to ease the removal of the part and without a grip.

It prevents studs from rusting or corroding and protects them from abrasion. They are easy to install and remove. It is used in manufacturing, railings, fences, furniture and other applications.

• Material: LDPE
• Colour: Natural

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. They come in three types: flanged base, cupped base or spring body.

Flexible End Caps are made from a flexible material that is able to stretch on to larger diameters for a snug fit. They provide protection to threads and non-threaded ends.

The cap features a hanging tab, which allows them to be used with wire hooks. They are an ideal solution for low temperature masking applications.

The caps also benefit from acid resistant material.

• Can stretch on to larger diameters for a snug fit.

• Provides protection to threads and non-threaded tips.

• Features a hanging tab for use with wire hooks.

Material: TPE Colour: Black Series Code: SR1021

Flexible End Caps with acid resistance are designed to seal and protect the ends of pipes, tubes and fittings. Features a hanging tab that allows them to be used with wire hooks. More acid resistant and can stretch for a tight fit.

• Provides excellent protection for threaded applications.

• Highly resistant to shredding.

• Green PVC option can be used with oil and grease applications.

Material: Vinyl, PVC Colour: Green, Black Series Code: SR1020

Standard Flexible End Caps are compatible with Metric, BSP and UNF threads. Guards against dust and moisture. Applied on the ends of pipes, tubes, and fittings.

• Suitable for Metric, BSP and UNF threads.

• High quality gloss finish.

• Can withstand high operating temperatures.

Series Code:

Flexible Pipe Caps protect threaded pipe ends. Flexible design that is simple to install. Puncture, dust, moisture resistant. Typically used in automobiles, HVAC systems, and on construction equipment.

• It protects threaded pipe ends.

• Ideal to use for pipe and tubing configurations.

• Have a outstanding toughnes and are puncture resistant.

Material: PE Colour: Yellow, White Series Code: SR1388

Garden Cane Caps with a cross head pattern are typically applied to the tips of garden canes and other pointed stick or pole applications. They are weather-resistant and help prevent harmful injuries to users. Designed to accommodate a variety of diameters.

• A useful cap with a cross head design that is commonly applied to the tip of garden canes, metal rods and other stick applications.

• Protects the application from damage and the ingress.

• Prevention of accidental user injury.

Material: PVC Colour: Green, Yellow Series Code: SR1203

Gas Cylinder Valve Plugs have been developed in partnership with major European gas companies. They create a tight seal. The distinctive vent cap allows gas to be released safely.

• It protects industrial gas valves from the ingress of dust, dirt and other contaminants.

• Its unique vent cap allows for the safe release of gas after accidental opening of the valve.

• Used in gas storage, industrial and transportation applications.

Series Code:

Grease Nipple Caps are designed to protect grease nipples from dust, moisture, dirt, and other contaminants. Our range offers a selection of caps with a tab, or without a tab, to make it easier to remove. The design of the cap provides a choice of knurled or non-knurled heads for easy gripping. These grease nipple caps can also be used as a visual indicator of whether the fitting has been lubricated.

These are an economical solution that is quick and easy to install and remove.

Used in fluid transmission applications that have grease nipples.

• Designed to protect from dust, moisture, dirt, and other contaminants.

• Quick and easy to install and remove.

• Suitable for use in machinery, equipment, vehicles or any application that uses grease nipples.

Material: TPE, LDPE Colour: Black, Red, Yellow Series Code: SRPITPE, SRPI, SR1019