ANSI Plastic Push Fit

Flange Protection Discs are easy to fit. The disc has four pre-punched holes, through which cable ties can be easily attached for a secure fit. When needed other fastening products such as retainer plugs, pins and washers can also be applied.

These protective discs provide cost-effective full face protection for a flanges exposed sealing surface. They have a special design with multiple holes to match the flanges bolt hole diameter and bolt circle.

The extensive range covers a variety of sizes and pressure ratings. They includes options that are suitable for DIN flanges DN 10 to DN 600 - Pressure Groups PN 6, 10, 16, 15 and 40, and ANSI flanges 1/2 inch to 32 inches - Pressure Groups 150, 300, 600 and 900 pounds (lb).

Ensure you select an appropriate protector by first measuring both the Outside Diameter and Bolt Circle Diameter of your flange.

• Easy and secure fitting with cable ties or other fastener solutions.

• Cost-effective full face protection for a flanges exposed sealing surface.

• Pre-punched hole design that matches a flange bolt hole diameter and bolt circle.

• Options suitable for DIN flanges DN 10 to DN 600.

Material: PP Colour: Black Series Code: SR1172

Flange Covers are ideal for safeguarding internally coated flanges and offer comprehensive flange protection. Universally compatible with a wide range of flange types, including ANSI B 16.5, DIN 2631-2635 and BS 4504.

• Flange Covers are ideal for protecting internally coated flanges, and they provide complete all-round flange protection.

• Suitable for all types of flange faces and bolt holes.

• Flexible, durable and easy to fit.

Material: PE Colour: Yellow Series Code: SR1353

Push In Full Face Flange Protectors are intended to protect the whole face of flanges from contamination, during storage and transport. Features flexible fins that provide a tight fit in the bore. It has ANSI B16.5 Class 150 flanges, DIN2627 to 2638 and BS5504 ratings.

• Full Face Flange Protectors have a simple push-in design.

• Flexible fins that ensure a snug fit into the bore, every single time.

• Requires no fasteners.

Material: LDPE Colour: Yellow Series Code: SR1365

Ribbed Pipe End Caps keep dirt and other contaminants from threaded and non-threaded tubes, pipes and rods. Masks areas during painting processes. Can resist temperatures up to 79.4C.

• It protects from dirt, dust or debris.

• Designed for plumbing, HVAC, and industrial applications.

• It can withstand a maximum temperature of 79.4C.

Material: LDPE Colour: Red, Yellow Series Code: SR1046

Standard Size Pipe Caps are a low cost protectve cap with a high quality finish.

Moulded caps that are designed to grip over the outside diameter of threaded and non-threaded pipe ends, preventing the ingress of foreign materials during storage and shipping.

The cap design features internal ribs that ensure a tight fit. In addition, the range includes caps that have a small vent hole to eliminate air pressure build up, and meets ANSI and DIN specifications.

• Designed to prevent ingress of foreign material during storage or shipping.

• Includes internal ribs to ensure a tighter fit.

• Features a small vent hole to eliminate air pressure build up.

Material: LDPE, PVC Colour: Green, Blue, Orange, Yellow, Red, Black, Natural, Grey Series Code: SR1358, SRTXTPE, SR1387, SR1340