NPT Threads

Flanged Caps are designed for easy assembly and removal, either with automated equipment or by hand. Typically used to protect metric or imperial threads, with or without O-Rings. The larger flange allows for faster application and removal when using it by hand.

For the purpose of quality control; the natural coloured caps allow you to see through the cap and check whether the O-ring is installed, or not installed, on the protected fitting.

Provides a snug and secure fit.

• Designed to cover and protect threads.

• Protects from damage, dirt, and moisture.

• Used in the automotive and engineering industries.

Material: TPE, LDPE Colour: Yellow, Natural Series Code: SRCTLTPE, SR1116

High-temperature flanged caps shield openings from contaminants and damage in extreme heat conditions. These caps are built to withstand high temperatures, while maintaining their structural integrity, and sealing properties.

A flanged design extends beyond the edge of the component, providing additional coverage. Provides a secure grip for easy application and removal, even in challenging conditions.

Used in the automotive and manufacturing industries, as well as applications requiring metal finishing.

• Designed to protect threaded or non-threaded ends of pipes, tubes, and fittings. Typically used to for metric or imperial threads, both with and without O-rings.

• Simple installation and removal, either with automated equipment or by hand.

• Designed to withstand high temperatures.

Material: Silicone Colour: Yellow, Grey, Clear, Pink Series Code: SR5754

Stud Protection Caps protect threaded studs and bolts against damage, contamination, and corrosion. These caps are designed to resist severe temperatures without losing structural integrity or sealing characteristics.

The studded construction protects against injuries from protruding threaded rods.

Used in the automotive and manufacturing industries, as well as in applications that need metal polishing.

• Provides general protection during manufacture, storage, and transportation even in severe temperatures.

• Simple installation and removal, either with automated equipment or by hand.

• Ensures a snug fit.

Material: TPR Colour: Black Series Code: SR1026

NPT Thread Plugs are used to seal and protect the ends of BSP and NPT threaded pipes and fittings. The robust design ensures they can withstand high pressure, temperature and damage during storage and shipment. The tapered form allows for a tight, leak-free fit across various inner diameters.

• Used to seal and protect the ends of BSP/NPT threaded pipes and fittings.

• Their robust design allows them to withstand high pressure, temperature, corrosion, dirt, and damage during storage and shipment.

• Used in plumbing pipes, HVAC, automotive, and industrial applications.

Material: LDPE Colour: Blue Series Code: SR1114

Push Fit End Caps are a simple and economical way of protecting metric and UNF threads during painting, assembly, and transportation.

Manufactured from a soft, durable TPE that provides a better grip, and a tight fit. Easy to install and remove.

Commonly used in plumbing, HVAC, and industrial applications.

• Suitable metric and UNF threads.

• Protects pipe ends from damage. Keeps dirt and debris out.

• Can operate in temperatures ranging from -60 C up to 135 C.

Material: LDPE, TPE, Colour: Red, Blue, Series Code: SR1161, SRCFBTPE, SRCFB

Soft Knurled Caps are a simple and economical way of protecting metric and UNF threads during painting, assembly or transportation. They have a knurled exterior and are manufacured from a soft, durable TPE that provides a better grip and a tight fit. Protects pipe ends from damage, and keeps dirt and debris out.

Easy to install and remove. They can operate in a temperature from -60 C up to 135 C.

Commonly used in plumbing, HVAC, and industrial applications.

• Simple and economical way of protecting metric and UNF threads.

• Easy to install and remove.

• Operatures in temperatures from mimimum -60 C up to maximum 135 C.

Material: TPE Colour: Blue Series Code: SRF0010

Stud Protection Caps are used to protect BSP and UNF threads. Designed with a small flange to allow the operator to tighten it with a socket spanner without having to remove the cap.

It increases protection against contaminants and limits wasted time during repetitive operations. It also allow economical handling.

• Material: Polyethylene (PE)
• Colour: Natural

Tear Tab Caps are readily installed and removed in various applications, including essential hydraulic tubes and pipelines. Provides protection against damage, filth, moisture, and other kinds of intrusion. Suitable for a variety of applications and threads.

• Quick fitting and release.

• Simple tear-away tab design.

• Versatile cap solution that is ideal for numerous applications.

• Protection for UNF/JIC or NPT theads.

Material: LDPE Colour: Natural, Blue, Yellow, Black Series Code: SR1022, SR1033

Threaded Protection Plugs designed for use on NPT Threads. Safeguards threads and fittings from damage and contaminants during production, storage and shipment. Can be installed by hand or using a 12-point socket head. Designed for strength and abrasion resistance. Can withstand temperatures from -40F up to 230F (-40C to 110C).

• It may be installed by hand or with a 12-point socket head, screwdriver or wrench.

• It can tolerate temperatures ranging from -40F to 230F | -40C to 110C.

• This threaded plug is suggested for usage where strength and abrasion resistance are required.

Material: HDPE, PEEK Colour: Red, Brown Series Code: SR5759, SRK0083